
For much of the past decade, sustainability in commercial property was conducted in the language of certification and disclosure. Energy performance certificates, green ratings and carbon reporting gave owners, occupiers and lenders a common vocabulary for intent. That vocabulary remains useful but is increasingly insufficient. A more physical question is moving to the centre of acquisition, retrofit and valuation: can the building draw the electricity it needs without forcing an expensive upgrade to the network that serves it?
The shift from fossil-fuel heating to electric heat pumps is the immediate driver. Heat pumps are efficient but they concentrate demand on the electrical supply rather than spreading it across a gas connection. Add cooling expanding in markets that once regarded it as optional and electric vehicle charging which occupiers increasingly expect and combined load can exceed what an existing connection was designed to carry. The first response was to ask for more capacity. The next is to ask whether the building can manage the capacity it already has.
Demand flexibility means shifting consumption away from peak periods storing electricity on site and in some cases exporting power back to the grid. For the Global Property Awards the trend matters because it changes what a well-executed property project looks like. Flexibility is not a plant specification or a sustainability badge. It is an operating discipline running through controls data leases and capital planning and increasingly through valuation.
Buildings were traditionally designed around a supply sized for gas heating lighting vertical transport and modest cooling. Electrifying heat typically increases the electrical load needed at the coldest moments often when networks are most stressed. In constrained markets the network operator may respond with a connection date measured in years a quoted reinforcement cost or a condition that the building limit its import at particular times.
That changes development and retrofit economics. A capacity upgrade is capital that produces no rent. It buys the right to draw power not a better building. Flexibility offers an alternative: design to operate within a lower import ceiling by shifting flexible loads using thermal or battery storage and sequencing equipment so not everything runs at once. The saving is not only connection cost but time which can decide whether a scheme is deliverable or stalls.
This is why flexibility is moving from pilot programmes into core strategy. Efficiency reduces the total energy a building consumes. Flexibility changes when it consumes it and timing is what networks are short of.
A building cannot flex load it cannot see or control. The technical foundation is metering and sub-metering at sufficient granularity controls that can adjust heating cooling ventilation charging and storage automatically and a data layer that records what happened and can be evidenced to a network operator aggregator or contract counterparty.
That combination is more demanding than it sounds. Many building management systems were commissioned to keep plant running not to trade energy. Sensors may exist without being connected to anything that acts on their readings. Controls may be proprietary and closed to third-party platforms. Data may sit in separate silos for HVAC lighting EV charging and tenant billing.
Making flexibility operational typically involves:
Buildings that earn revenue through demand response capacity markets or bilateral flexibility contracts need all of the above plus a route to market. That may be through an aggregator a supplier or a network operator’s flexibility tender. The revenue is rarely transformative on its own. Its value lies in what it offsets: connection costs standby charges and the risk of being unable to operate the building as intended.
Flexibility raises a question property has historically handled poorly: who pays for the infrastructure and who receives the benefit? If an owner installs batteries controls and metering the capital sits with the owner. But the load being shifted may belong to occupiers whose comfort processes or charging needs are affected by when power is available.
Leases rarely address this. Service charge provisions may not contemplate flexibility assets or the revenue they generate. Fit-out standards may specify equipment that cannot be curtailed. Metering may leave the owner unable to see consumption at the level needed to participate in a market. Where occupiers have inclusive rents they have little reason to care about shifting load and the owner has little ability to act without cooperation.
Resolving this does not require a single model but it does require clarity. Owners and occupiers need to agree how infrastructure is funded how revenue is shared what operational constraints apply and how data is collected and used. In multi-let buildings that means coordination across tenancies rather than control of one occupier’s operations. Buildings that get this right treat flexibility as part of the service proposition not a technical add-on imposed on tenants.
The most direct financial case is avoided or deferred capital expenditure. Where a network upgrade is expensive or slow designing to a lower import ceiling can make a project viable. Where an existing building faces costly reinforcement to support electrification managing demand may allow the retrofit to proceed in phases. Storage and controls have a cost but it can be compared with the alternative rather than assumed.
There is a resilience case too. A building with on-site storage and the ability to island critical loads can keep operating through network constraints or interruptions. For occupiers whose operations depend on continuity laboratories healthcare logistics some manufacturing that capability has value in leasing conversations rather than only in energy bills.
Valuation and due diligence are beginning to reflect this. A building that can flex its load has more options: it can accept a lower connection capacity participate in grid markets and adapt as electrification proceeds. A building that cannot may face future capital obligations to reinforce supply or restrictions on how it can be used. Appraisers and lenders may not price flexibility explicitly in every market yet but the underlying questions operating cost deferred capital demand growth already drive discounts and premiums.
The property industry has become comfortable describing buildings in terms of what they are: location specification certification lease profile. Demand flexibility adds a question about what a building can do. Can it shift store and export electricity? Can it demonstrate that capability with data? Can the owner and occupier act on it together?
Those questions are likely to become more common as electrification advances and networks remain constrained. The buildings that answer them well will be cheaper to connect more resilient in operation and better placed to adapt as the balance between supply and demand shifts. The ones that do not may find that the constraint they face is not the availability of power in the abstract but their own inability to manage it.